Annealing Effect On Structural, Functional, And Device Properties Of Flexible Zno Acoustic Wave Sensors Based On Commercially Available Al Foil

This paper reports post-annealing of zinc oxide (ZnO) films on flexible foil substrates in order to improve the functional and acoustic wave sensing performance. ZnO films of 5 mu m thick were deposited onto aluminum foils (50 mu m thick) using magnetron sputtering and then annealed in air at different temperatures between 300 degrees C and 500 degrees C. Effects of postannealing on structural, optical, and device properties of the ZnO films and ZnO/Al foil acoustic wave devices were investigated. A temperature of 350 degrees C was identified as the optimized annealing temperature, which resulted in good light transmission, improved crystallinity, reduced film stress/defects, and increased amplitude of reflection signals of both Lamb and Rayleigh waves. The annealed ZnO/Al acoustic wave devices demonstrated a large temperature coefficient of frequency and a good linearity, revealing the potential for precise temperature sensing.