Characterization of Surface α-Particle Radiation, Internal Traceability and Simulation of Typical Tin Spheres

Longfei Liu,Zhangang Zhang,Hong Zhang, Hui Li,Zhifeng Lei, Junyang Luo,Chao Peng, Changhao Sun,Yujuan He

Applied Sciences(2024)

引用 0|浏览1
暂无评分
摘要
Surface α-particle emissivity testing and spectral characterization of two leaded tin spheres (Sn10%Pb90%, Sn63%Pb37%) and one lead-free tin sphere (Sn96.5%Ag3.0%Cu0.5%, SAC305) were carried out. The results show that Sn10%Pb90% Sn spheres have the highest α-particle emissivity; Sn63%Pb37% Sn spheres are the next highest, which is an order of magnitude lower than the α-particle emissivity of Sn10%Pb90% Sn spheres; and SAC305 Sn spheres have the lowest emissivity, which is reduced by about 55.6% compared to the emissivity of Sn63%Pb37% Sn spheres. All three types of tin spheres, after purification treatment, achieved the grade of ultra-low alpha particle emissivity (<0.002 α/(cm2·h)). The internal radionuclide traceability of the tin sphere, combined with the energy spectrum, reveals that the emission spectrum of the tin sphere exhibits an obvious “single peak” characteristic, with the peak energy in the interval of 5 MeV~5.5 MeV. Comparative analyses revealed that 210Po is the main nuclide that produces alpha particles, and 210Po originates from the decay of 210Pb. Further Monte Carlo simulations show that α-particles with energies greater than 4.1 MeV in the measured energy spectrum all come from the contribution of radionuclides within 5 μm of the surface layer of the tin sphere, which accounts for 60% of the total radioactivity. Combining the experimental and simulation results, it is found that the internal radionuclides of the tin sphere are characterized by more surface layer and less internal layer. The above results are of great significance for the establishment of α-particle mitigation methods for tin spheres.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要