Resilience-based seismic design and cyclic behavior of assembled joints between self-compacting concrete-filled rectangular steel tube frame columns and H-shaped steel beams

The overall stability of prefabricated steel structures depends significantly on the strong seismic resilience exhibited by the connections between beams and columns. This paper introduces a novel beam–column connection approach, referred to as the welded upper and lower flanges and two diagonal web plates (WULF-TDWP). Unlike conventional methods, this approach replaces bolted connections with butt-welded joints between steel beams and employs short cantilever beams to achieve plastic hinge displacement. The steel-column cross-section was designed with a larger aspect ratio to better absorb and distribute energy. Six full-scale specimens were subjected to cyclic loading tests to investigate the seismic performance of the WULF-TDWP system. The main test parameters included the axial load ratio, welding configuration in the node region, and presence of reinforcement plates. The specimens exhibited two distinct failure modes: plate buckling deformation and beam–column end weld tearing. The experimental results included the hysteresis curves, skeleton curves, ductility coefficients, stiffness degradation curves, and strength degradation curves of the specimens. The experimental findings highlighted the favorable hysteresis performance, load-carrying capacity, and deformation capacity of all the nodes. Additionally, the plastic hinges were observed to shift, thereby delaying the premature failure of the node region. Notably, the omission of welding between the cantilever short beam flange and steel column significantly reduced the initial stiffness of the node. Through finite element analysis, the seismic performance of the beam-column joints with upper and lower flange welded connections and cantilever short beams was elucidated. The reliability of the finite element model for assessing the seismic performance of the nodes was confirmed through validation using experimental findings. Furthermore, this paper categorizes the nodes and introduces a simplified calculation model based on the moment–rotation method.