Accuracy of mapping results of thoracolumbar vertebral fracture verified using finite element analysis.

OBJECTIVE:To verify the results of three-dimensional fracture mapping of T12-L2 compression fractures by the finite element method from a biomechanical point of view, and to provide clinical reference. METHODS:This study is a retrospective study. By collecting 150 patients' computerized tomography (CT) data with thoracolumbar compression fractures (T12-L2) with AO type A. Mimics was used for three-dimensional (3D) reconstruction, and 3-Matic was used to mark fracture lines in stereo images. After standardized treatment, all fracture lines were drawn in the same 3D image, and finally fracture lines and fracture map were drawn. Constructing a 3D finite element model of thoracolumbar segment to verify the fracture thermogram results from the perspective of biomechanics. RESULTS:From the fracture map, fracture lines were mainly distributed in the upper part of the vertebral body, the leading edge of the anterior column (AC), and the lateral margin of the middle column (MC). In the finite element analysis, the stress mainly was concentrated on the edge of the anterior and middle column of the vertebral body and the upper part of the vertebral body, and the stress gradually decreased from the upper endplate to the endplate, and the stress was the least in the posterior column (PC) of the vertebral body. CONCLUSION:The results of finite element analysis further confirm the accuracy of fracture mapping and explain the distribution characteristics of fracture lines. This will provide theoretical support for the selection of clinical fracture treatment, intraoperative implants, and for a standard fracture model.