Notch band characteristics improvement of a printed ultra wideband antenna by embedding frequency Selective Surface

Excellent improvement on band notched characteristics of a circular ultra-wideband (UWB) printed antenna by embedding Frequency Selective Surface (FSS) at proper position in the far field is presented in this article. A square shaped mushroom Electromagnetic Band Gap (EBG) structure is placed beside the feeding line to achieve an elimination band of 3.7–4.2 GHz over the ultra-wideband range of 2.9–14 GHz showing fractional bandwidth of 131 %. The proposed antenna's electrical dimension is 0.29λ×0.367λ×0.015λ. After embedding the properly designed FSS at optimal position along with the antenna the maximum gain of the radiating frequency increases from 7.1 dBi to 8.1 dBi and notch frequency gain reduces to −7.9 dBi from −5 dBi. Radiation efficiency at notch frequency also reduces from 31 % to 17 %. More than 10 dB Front to Back lobe Ratio (FBR) is obtained at 4.5 GHz. With the aid of Advanced Design Software (ADS), an equivalent circuit for the suggested antenna is created and its response is contrasted with measured and simulated outcomes. The proposed antenna is useful in UWB range with band rejection for C band satellite downlink.