Effect of laser beam incidence angle on weld formation mechanism and corrosion resistance of T2 copper/304 stainless steel

Over the last 20 years, industry interest in copper has increased. Its application in the petrochemical, automotive, and nuclear power industries highlights the need for new research directions especially in the joining of copper to other metals. In this work, lap joint of 304 stainless steel and T2 copper precoated with Cu–Mn–Ni filler metal was performed by laser brazing. The aim of this study is to characterize the influence of laser beam incidence angle on the welded joint forming mode, microstructure, elements diffusion and corrosion resistance. According to the findings, the joint is classified as a welded joint when the laser beam incidence angle is 80°, and as a welded-brazed joint when it’s 90°, 70°, or 60°. The microstructure is mainly composed of Cu-rich and Fe-rich phases, Mn in the Cu-rich phase aggregation and Cr in the Fe-rich phase aggregation. In the fusion zone (FZ) the content of less than 50% of the liquid will be in the form of supersaturated droplets in the matrix of the other side. The local corrosion pair that the copper steel matrix and liquid drop produce in the FZ speeds up the dissolution of the Cu-rich phase, which effected corrosion resistance of the joint.