Comparing Surface and Bulk Curing Processes of an Epoxy Vitrimer

We used atomic force microscopy-based infrared spectroscopy (AFM-IR) and nanomechanical mapping (AFM-NM) to image the surface of a vitrimer, specifically dicarboxylic acid-cured diglycidyl ether of bisphenol A (DGEBA), to assess the curing process of a surface layer and compared this to the process in the bulk. We identified the beta-hydroxy esters with various functionalities that are the key to form the cross-links for a system, including difunctional DGEBA and carboxylic acids. The IR peaks of the carbonyl group in generated ester groups are distinguished clearly from those in acids, allowing us to quantitatively assess the curing process at the surface and in the bulk. The initial curing at the surface exhibits a gradual cross-linking and is found to be lower than a rapid cross-linking in the bulk due to a relatively lower concentration of the beta-hydroxy esters with high functionalities. This curing process leads to a smaller chemically and mechanically heterogeneous nanostructure at the surface relative to the bulk. After multiple reprocessings, a substantial number of esters lacking dynamic exchange capability form in the bulk, which decrease the flowability and reprocessability of the vitrimers and therefore the mechanical properties.