Experimental Study on Liquid Metal Embrittlement of Al-Zn-Mg Aluminum Alloy (7075): From Macromechanical Property Experiment to Microscopic Characterization

This study is a multiscale experimental investigation into the embrittlement of Al-Zn-Mg aluminum alloy (7075-T6) caused by liquid metal gallium. The results of the experiment demonstrate that the tensile strength of the 7075-T6 aluminum alloy significantly weakens with an increase in the embrittlement temperature and a prolonged embrittlement time, whereas it improves with an increase in the strain rate. On the basis of the analysis of the experimental data, the sensitivity of the embrittlement of 7075-T6 aluminum alloy by liquid gallium to the loading strain rate is significantly higher compared to other environmental factors. In addition, this study also includes several experiments for microscopic observation, such as Scanning Electron Microscope (SEM) observation, Energy-Dispersive Spectrometer (EDS) spectroscopy, and Electron Back Scatter Diffraction (EBSD) analysis. The experimental observations confirmed the following: (1) gallium is enriched in the intergranular space of aluminum; (2) the fracture mode of 7075-T6 aluminum alloy changes from ductile to brittle fracture; and (3) the infiltration of liquid gallium into aluminum alloys and its enrichment in the intergranular space result in the formation of new dislocation nucleation sites, in addition to the original dislocations cutting and entanglement. This reduces the material's ability to undergo plastic deformation, intensifies stress concentration at the dislocation nucleation point, and, ultimately, leads to the evolution of dislocations into cracks.