Optimization of fungal chitosan production from Cunninghamella echinulata using statistical designs

Fungal chitosan (FCH) is superior to crustacean chitosan (CH) sources and is of immense interest to the scientific community while having a high demand at the global market. Industrial scale fermentation technologies of FCH production are associated with considerable challenges that frequently restrict their economic production and feasibility. The production of high quality FCH using an underexplored fungal strain Cunninghamella echinulata NCIM 691 that is hoped to mitigate potential future large-scale production was investigated. The one-factor-at-a-time (OFAT) method was implemented to examine the effect of the medium components (i.e. carbon and nitrogen) on the FCH yield. Among these variables, the optimal condition for increased FCH yield was carbon (glucose) and nitrogen (yeast extract) source. A total of 11 factors affected FCH yield among which, the best factors were screened by Plackett–Burman design (PBD). The optimization process was carried out using the response surface methodology (RSM) via Box-Behnken design (BBD). The three-level Box– Behnken factorial design facilitated optimum values for 3 parameters—glucose (2% w/v), yeast extract (1.5% w/v) and magnesium sulphate (0.1% w/v) at 30˚C and pH of 4.5. The optimization resulted in a 2.2-fold higher FCH yield. The produced FCH was confirmed using XRD, 1 H NMR, TGA and DSC techniques. The degree of deacetylation (DDA) of the extracted FCH was 88.3%. This optimization process provided a significant improvement of FCH yields and product quality for future potential scale-up processes. This research represents the first report on achieving high FCH yield using a reasonably unfamiliar fungus C. echinulata NCIM 691 through optimised submerged fermentation conditions.