Gold-sputtered LPG fiber sensor pulse electroplated with iron-carbon for monitoring passivation and depassivation of carbon steel in concrete pore solutions

Monitoring the passivation and depassivation of reinforcement steel is of significant importance, particularly for certain reinforced concrete structures that define the time of steel rebar depassivation as the end of the durability service life. In this study, a gold -sputtered long -period grating (LPG) optical fiber sensor coated with pulseelectroplated iron -carbon is characterized for continuous monitoring of the surface state of carbon steel from passivation to depassivation in concrete pore solutions. Electrochemical corrosion and optical tests are performed simultaneously using an electrochemical workstation and an optical instrument. A protective passivation film with a thickness of approximately 4.05 nm was formed on the iron -carbon coating after 5 days of immersion in the simulated concrete pore solution, and its thickness is nonlinearly correlated with the wavelength shift of the LPG optical fiber sensor during the passivation process. The resonant wavelength changes in the opposite direction after depassivation, which can be used for the detection of the depassivation time. After depassivation, the wavelength shift and mass loss of the iron -carbon coating can be divided into three phases, and a linear relationship exists in each phase. The gold -sputtered fiber sensor coated with pulse -electroplated iron -carbon investigated in this study, demonstrates better performance than silver -deposited LPG fiber sensors.