Process intensification for the synthesis and purification of battery- grade Li2CO3 with microfluidics

Battery-grade lithium carbonate (Li2CO3) with a purity of higher than 99.5 wt% is of great importance as a high value-added lithium salt. However, influences of different reaction systems and process control on product purity remain unclear. Herein, a membrane dispersion microreactor was used to enhance the mass transfer of preparation and purification processes in homogeneous and heterogeneous system. Synthetic systems of Na2CO3-LiCl, NH4HCO3-LiCl, and NH3 center dot H2O-CO2-LiCl, CO2 purification based on carbonation and decomposition were adopted. The Li2CO3 purity was increased by the improvement of mixing performance. The carbonation time was reduced by 62.5% and 58.3% for the NH3 center dot H2O-CO2 and CO2 purification systems, respectively. In the two ammonia-based systems, Li2CO3 particles with a purity of 99.7-99.8 wt% were one-step prepared with a size of 3-5 mm, which also met the requirement of the battery-grade standard. The purity was further increased to 99.9 wt% by CO2 purification and LiHCO3 decomposition. The investigation could provide a feasible alternative for the controllable preparation of battery-grade Li2CO3 in one or multiple steps.(c) 2023 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.