Enhancing Surface Integrity of Micro-Holes Machined on Inconel 718 using Shaped Tube Electrochemical Machining via Hydroxide Mixing

This research explores enhancing surface integrity of high aspect ratio (AR>5) micro-holes machined on Inconel 718 using Shaped Tube Electrochemical Machining (STEM) by mixing limited amount of metal hydroxides in the different electrolyte solutions. Typically, STEM employs hazardous acid solutions. These solutions cause machine corrosion, environmental risks, and harm to operators. This research aims to explore eco-friendly and safe alternatives. The efficacy of adding NaOH or KOH to eco-friendly neutral aqueous solutions of NaCl, KBr, and NaNO3 on machined surfaces is expounded. We assess electrolyte mixing parameters, including concentration and composition, and explore the effects of varying electrolyte temperature, voltage, and tool feed rate. Surface assessment uses SEM, EDX, XRD, and profilometry. Results reveal that adding hydroxides to neutral salt solutions improves surface roughness and reduces pitting. Hydroxide ions aid in dissolving oxide films during STEM of Inconel 718. Under specific conditions (9 g l(-1), 18 degrees C, 8 V, 0.8 mm min(-1)), NO3 vertical bar OH yielded the lowest Ra (1.64 mu m), while Br broken vertical bar OH resulted in the highest Ra (2.14 mu m) with pitting, cracks, and deposits. NO3 vertical bar OH exhibited a 25% decrease in Ra when a hydroxide concentration rise from 3 g l(-1) to 15 g l(-1). This research supports eco-friendly STEM for improved surface quality without process performance compromise. (c) 2023 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.