The effect of electric current on dislocation activity in pure aluminum: A 3D discrete dislocation dynamics study

Introducing electric current into metals and alloys to improve their ductility and to reduce the hardening tendency has been widely adopted. Nevertheless, how the electricity affects the plastic deformation of those materials remains a critical issue with controversial opinions. To clarify the material plastic deformation subjected to electric current, or the so-called electroplastic behavior, an in-depth understanding of the dislocation evolution during that process is vital. From that motivation, three-dimensional dislocation dynamics simulations were carried out to explore the dislocation behavior during the uniaxial tensile deformation of pure aluminum with the introduction of electric current. The scattering process between electrons and dislocations was first captured by a physical model. The electron wind force and local heat effect were quantitatively analyzed by figuring out the momentum and the energy transferred during the interaction of electrons and dislocations respectively. The dislocation density evolution, the activation of different slip systems and the dislocation distribution were further analyzed based on the simulations. The dislocation density in the [111] direction is revealed to increase more significantly than [101] and [001] directions with the introduction of electric current. The results show that the current can reduce the flow stress by promoting the activation of the difficult-to-move dislocations. The activation effect reduces the dislocation tangling tendency and leads to more uniform dislocation distribution. Therefore, a reduction of the flow stress can be observed in EAT comparing to TAT, via the discrete dislocation dynamics simulations even though the dislocation densities are similar. The simulation results are also confirmed by the EAT and TAT experiment results and TEM observations.