Block-flexure toppling in an anaclinal rock slope based on multi-field monitoring

Toppling is a widespread failure mode in natural and excavated anaclinal rock slopes and threatens the con-struction and operation of important infrastructure such as hydropower and transportation corridors in south-west China. Therefore, comprehending the mechanisms underlying toppling is essential for relevant landslide prediction and prevention. In this study, we developed a physical model of an anaclinal rock slope using the Linda landslide as a site case. Based on field monitoring using Gopro cameras, high-speed cameras, strain sensors, stress sensors, and acoustic emission systems, the evolution of the anaclinal rock slope model was analysed. The reliability of the physical model test was verified by comparing the deformation characteristics of the landslide site with those of the slope model. The monitoring results suggested that the slope deformation process could be divided into five stages: an initial interlayer dislocation stage, a deformation initiation stage, a crack generation and propagation stage, a crack penetration stage, and a failure stage. The rock mass could be categorised into four deformation zones: the fresh zone, weakly toppled zone, moderately toppled zone and highly toppled zone. Acoustic emission sensors deployed near the failure-prone region held the potential to serve as early warning indicators for landslides on anaclinal rock slopes. Valley incision played a significant role in the formation of sliding surfaces in anaclinal rock slopes. Furthermore, the model experiment observed multiple failure surfaces and the failure behaviour of the landslide rock mass, shedding light on their connection to the deformation process and the stress state in the model. The study revealed the deformation and failure mechanism of an anaclinal rock slope from many perspectives and deepened our understanding of toppling type of landslides.