Maceral evolution of lacustrine shale and its effects on the development of organic pores during low mature to high mature stage: A case study from the Qingshankou Formation in northern Songliao Basin, northeast China

Organic matter (OM) hosted pores are crucial for the storage and migration of petroleum in shale reservoirs. Thermal maturity and macerals type are important factors controlling the development of pores therein. In this study, six lacustrine shale samples with different thermal maturities from the first member of the Qingshankou Formation in the Songliao Basin, of which vitrinite reflectance (R-o) ranging from 0.58% to 1.43%, were selected for a comparative analysis. Scanning electron microscopy (SEM) and reflected light microscopy were combined to investigate the development of organic pores in different macerals during thermal maturation. The results show that alginite and liptodetrinite are the dominant primary macerals, followed by bituminite. Only a few primary organic pores developed in the alginite at the lowest maturity (R-o = 0.58%). As a result of petroleum generation, oil-prone macerals began to transform to initial-oil solid bitumen at the early oil window (R-o = 0.73%) and shrinkage cracks were observed. Initial-oil solid bitumen cracked to oil, gas and post-oil bitumen by primary cracking (R-o = 0.98%). Moreover, solid bitumen (SB) was found to be the dominant OM when R-o > 0.98%, which indicates that SB is the product of oil-prone macerals transformation. Many secondary bubble pores were observed on SB, which formed by gas release, while devolatilization cracks developed on migrated SB. Additionally, at the late oil window (R-o = 1.16%), migrated SB filled the interparticle pore spaces. With further increase in temperature, the liquid oil underwent secondary cracking into pyrobitumen and gas, and spongy pores developed on the pyrobitumen at higher levels of maturity (R-o = 1.43%), which formed when pyrobitumen cracked into gas. Vitrinite and inertinite are stable without any visible pores over the range of maturities, verifying their low petroleum generation potential. In addition, it was concluded that clay minerals could have a catalytic effect on the petroleum generation, which may explain why organic-clay mixtures had more abundant pores than single OM particles. However, after R-o > 0.98%, authigenic minerals occupied the organic pore spaces on the organic-clay mixtures, resulting in fewer pores compared to those observed in samples at the early to peak oil window.(c) 2023 The Authors. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).