Uncertainty and reliability analyses of adhesive assembly to the center-of-mass drift of float components based on the non-probabilistic interval model

Multi-source and strong uncertainties of the adhesive assembly process for high-precision inertial devices are critical issues that result in the current low assembly accuracy and poor assembly consistency. This paper addresses the resulting uncertainty in the center-of-mass drift of the float components of a high-precision inertial device. An interval-based non-probabilistic convex model is used to characterize the uncertainty of the bonding defect parameters of the adhesive assembly process, and the uncertainty transferring from those parameters to the center-of-mass drift is constructed by using a surrogate model and numerical simulations. A reliability analysis is carried out to understand the effect of the uncertainties of three types of bonding defects on the center-ofmass drift, and the sensitivities of the center-of-mass drift to the bonding defects are also found. The results show that the reliability index of the center-of-mass drift obtained under the initial parameter intervals is 0.689, indicating the center-of-mass drift at the risk of being out of the accuracy requirement. By adjusting the parameter intervals of the bonding defects to stabilize the center-of-mass of the assembled components, the reliability index is then improved to greater than 1.