Separation of an ε-poly- l -lysine derivative by solvent extraction under a controlled interfacial potential difference

This paper describes the availability of a 1,2-dichloroethane (DCE)—water (W) interfacial system under a controlled interfacial potential difference for the separation of polycationic species. The system was applied to the production of polyethylene glycol-modified ε-poly- l -lysine (PEG-εPL). PEG-εPL is produced by a fermentation process, and the crude product contains a significant amount of non-modified εPL, which is hardly separated by conventional chromatographic techniques. Both εPL species exist in fully protonated forms under certain acidic conditions, and an extractant, dibenzo-18-crown-6 (DB18C6), associates with their ammonium groups to stabilize the polycations in DCE. Despite the polydispersity of the samples, the εPL and crude PEG-εPL give well-defined cyclic voltammetric waves due to the DB18C6-assisted transfer of the polycations at the polarizable DB18C6 (DCE) | (W, pH ~ 3) interface with midpoint potentials useful for a rough prediction of ion partition equilibria. Thus, the partition experiment was performed using the DB18C6, Bu 4 N[(CF 3 SO 2 ) 2 N] (DCE) | crude PEG-εPL, Li[(CF 3 SO 2 ) 2 N] (W, pH ~ 3) interfacial system, of which the potential difference was controlled to enable selective extraction of polycationic PEG-εPL by partition of the [(CF 3 SO 2 ) 2 N] − ion. The extract could be collected from the DCE phase and was found to consist of highly purified PEG-εPL. Graphical abstract