Investigation of the high-temperature field distribution characteristics for a multi-jet burner by OH-PLIF and coherent anti-Stokes Raman spectroscopy

The construction of a high-temperature gas calibration source is of great significance since it can provide an effective high-temperature experimental environment for, e.g. verifying high-temperature measurement techniques and studying high-temperature combustion mechanisms. Here, we try to obtain a high-temperature gas field on a multi-jet burner by controlling the gas supplies to it. We use OH planar laser-induced fluorescence (OH-PLIF) to observe the compositional uniformity of the field and coherent anti-Stokes Raman scattering (CARS) to investigate the temperature uniformity of the field. We find from OH-PLIF images that the distribution of OH between the adjacent jets becomes more uniform with the increasing flow rate of CH4, and the flow rate of the co-flow N2 around jets also affects the uniformity of OH distribution. The measured temperature distribution by CARS is consistent with the OH distribution. At the jet outlet location, the temperature distribution had a periodic variation and gradually became more uniform with the height increased from the jet outlet. We find that the flow rate of CH4 and co-flow N2 and the radiative heat transfer rate play an important role in temperature distribution for the multi-jet burner. Also, the results show that a wide range of temperatures can be constructed by regulating the recipe of the gas supplies, and the highest temperature achieved in this work is 2457 K.