Experimental Investigation of Pb Release Characteristics in Zn-Pb Mine Tailings under Simulated Leaching Conditions, Anguran, Iran

The aim of this research was to use a variety of leaching methods to see how different parameters affected the amount of lead leaching from tailings. Synthetic precipitation leaching procedure, toxicity characteristic leaching procedure, leachate extraction procedure, and field leach test protocols were utilized to assess the toxicity of the tailings. The impact of the liquid-solid ratio, particle size, contact time, and pH on lead release from tailings was also investigated. Accord-ing to the findings, pH entirely effects on the release of lead from the tailings, and amphoteric leaching behavior was observed. The tailings were classified as hazardous material as a result of the TCLP leaching protocol's findings. S1 and S2 samples had lead mobility indexes of 51% and 5.6%, respectively. The solubility process influenced the discharge of lead from the tailings. In the particle size ranges of 0.3-0.5 mm and 0.6-1.0 mm, respectively, the maximum amount of lead was released from S1 and S2 samples. Various experiments have shown that the interac-tion between different factors will have complex and strong effects on the leaching process. To that end, managing of tailings and preventing lead emission into the environment necessitates a unique technique. Leachability is affected by a number of factors and often multiple factors can produce synergistically different releases than would be predicted by each factor alone. However, validation of the leaching approaches to field-collected and monitored cases indicates that combined effects are either captured by the test data or can be considered through fate and transport modeling.