Performance Analysis of Piezoelectric Energy Harvesting System

This paper analyzes a piezoelectric system made of a smart lead zirconate material. The system is composed of a monolithic PZT (piezoelectric ceramic) plate made of a ceramic-based piezoelectric material. The experiment was conducted on a test stand with a GUNT HM170 wind tunnel and a special measurement system. The developed bluff-body shape mounted on an elastic beam with a piezoelectric was mounted on a mast with arms. Springs were fixed on the arms to limit the movement of the test object. Air flow velocity in the wind tunnel and forced vibra-tion frequencies were changed during the tests. The recorded parameters were an output voltage signal from the piezoelectric element and linear accelerations at selected points of the test object. The highest energy efficiency of the tested system was specified from mechanical vibrations and air flow. The results of the tests are a resonance curve for the tested system and a correlation of RMS voltage and acceleration as a function of the velocity of air flow for the excitation frequency f ranging from 1 to 6 Hz. The tests specified the area where the highest output voltage under the given excitation conditions is generated.