Optimization of SiO2 reflective layer thickness for improving the performance of structured CsI scintillation screen based on oxidized Si micropore array template in X-ray imaging

Structured scintillation screen based on oxidized Si micropore array template can effectively improve the spatial resolution of X-ray imaging. The purpose of this study is to investigate the effect of SiO2 layer thickness on the light guide and X-ray imaging performance of CsI scintillation screen when the structural period is as small as microns. Cylindrical micropores with a period of 4.3 & mu;m, an average diameter of 3.3 & mu;m and a depth of about 40 & mu;m were prepared in Si wafers. SiO2 layer was formed on the pore walls after thermal oxidation. Increasing SiO2 layer thickness would be beneficial to the propagation of scintillation light along the cylindrical channels. What was not previously anticipated was that the pore size gradually shrank as the SiO2 layer thickened. The pore shrinkage would reduce the filling rate of CsI in the templates and thus would reduce the production of scintillation light. The structured CsI scintillation screens with different SiO2 layer thicknesses were fabricated by filling CsI scintillator into the oxidized silicon micropore array template. The morphology, crystallinity, X-ray excited optical luminescence, and X-ray imaging performance of the screens were studied. The results show that the spatial resolutions of X-ray images measured using the structured CsI scintillation screens with different SiO2 layer thicknesses are close to each other, and they are all about 110 lp/mm. However, the X-ray excited optical luminescence of the screen and detective quantum efficiency of X-ray imaging vary with the thickness of the SiO2 layer. The optimal thickness is about 350 nm.& COPY; 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement