Experimental study for improving photovoltaic thermal system performance using hybrid titanium oxide-copper oxide nanofluid

Overheating of photovoltaic (PV) cell is one of the most common issues that cause the degradation of their function and reduce conversion efficiency. This work investigates the effect of using a novel TiO2-CuO hybrid nanofluid to improve the energy and exergy of photovoltaic thermal (PVT) systems by reducing PV cell temperature. Serpentine tubes soldered on an absorbing plate attached behind the PV module were proposed to improve heat removal of the PV module with volume concentrations of 0.2 vol% and 0.3 vol%, with a flow rate of 1.16 L/min. Improving the thermophysical properties of the hybrid nanofluid has reduced the temperature of the PV module by 39% more than the uncooled PV module. The PVT system's electrical power and overall efficiency improved by 77.5% and 58.2%, respectively, at increased volume concentration to 0.3 vol% compared with the uncooled PV module. The exergy analysis indicated an increase in the overall exergy efficiency by 14.97 %, with thermal exergy dropping because of the closer the outlet nanofluid temperature to ambient temperature. Hybrid nanofluid cooling has improved exergy efficiency to 14.97%, reducing exergy losses by 37.9% and entropy generation by 69.6% at 0.3 vol%. The economic analysis shows a better payback period of 21 months when cooling with a hybrid nanofluid compared with the uncooled PV module.