Effects of void shape and location on the fracture and plastic deformation of Cu (crystalline) /Cu64Zr36 (amorphous) composites

Voids are probably the most widely studied type of manufacturing defects since they are often formed during material processing. In this paper, the fracture and plastic deformation of Cu/Cu64Zr36 crystalline/amorphous composites with different void locations and shapes are investigated by molecular dynamics simulations. The results show that changes of the void location and shape in the composites significantly change the dislocation motion, shear transformation zones (STZs) activation, shear band propagation, and fracture strength of the composites. The largest shear strain is always found around the void, where it is most likely to activate dislocation motion, STZs and shear band formation. A stepwise increase of the shear localization is mainly related to the nucleation and emission of dislocations, while the very rapid increase is caused by shear band formation. Moreover, the variation of dislocation density and activity of shear bands are mainly responsible for the stress fluctuations in the composites. This paper provides important information for understanding and improving the plastic and fracture behaviors of composites by changing the location and shape of void from an atomistic perspective. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).