The Transverse Vibration Characteristics of Circular Saw Blade on Mobile Cantilever-Type CNC Sawing Machine

A circular saw blade is a commonly used tool in wood processing. The transverse vibration of the saw blade plays an important role in processing quality during cutting and affects its service life as well. In the study, the transverse vibration of the circular saw blade was investigated at the constant rotation by the simulation using ANSYS software when changing the cantilever length of the cantilever woodworking CNC circular saw machine. Meanwhile, the transverse vibration of the circular saw blade without and with load was explored by the eddy current sensors for when the detection point was differently away from the center of the circular saw blade. The time domain, probability density distribution, and power spectrum characteristics of the transverse vibration signal were analyzed, and the simulation values were compared with the actual cutting data. The results revealed that under certain conditions, the maximum transverse vibration value of the circular saw blade was the smallest in the simulation, then the middle in no-load, and the largest in actual cutting. The maximum transverse vibration value of the saw blade was increased with the extension of the cantilevered overhang, but gradually and slightly, indicating the transverse vibration was hardly affected by the change in overhang length of less than 300 mm. The finding provides the reference for the structural optimization design of cantilever CNC circular saw machines and the promotion of its application.