Irradiation damage and corrosion performance of proton irradiated 304 L stainless steel fabricated by laser-powder bed fusion

The irradiation-induced microstructure and corrosion performance of proton irradiated 304 L stainless steel (SS) fabricated by laser powder bed fusion (LPBF) is investigated. Irradiation-induced dislocation loops are observed in both LPBF and traditionally manufactured (TM) 304 L SS following 2 MeV proton irradiation at 360 °C. A comparison analysis of the oxide scales formed on proton irradiated LPBF and TM 304 L SS is conducted along with the unirradiated counterparts. The irradiation-induced defects accelerate the corrosion by providing a rapid diffusion path to form a thicker and more porous film with a double-layer structure and herein the oxide film thickness of TM 304 L SS is approximately twice that of the LPBF 304 L SS. The unique microstructure of high dislocation densities, cellular sub-grains boundaries and dispersed nanoscale inclusions provides large amounts of interfaces in LPBF samples, which is benefit to absorb the irradiation-induced point defects. The irradiation induced fast diffusion paths and the nucleation points of oxides are thus reduced, resulting in a thinner oxide film thickness and a better corrosion resistance revealed by the more Cr enrichment of inner scale in LPBF 304 L SS.