Confinement mechanism and compressive stress-strain behaviours of FRP-interlayer-steel confined concrete tubes

A fiber-reinforced polymer (FRP)-interlayer-steel confined concrete (FISC) column is formed by bonding the FRP material and a concrete-filled steel tube (CFST) with the grouting material, and it can improve the corrosion resistance and bearing capacity of CFST columns and avoid the early cracking of the epoxy resin in FRP confined concrete-filled steel tubes (CCFT). However, there are few researches on the compressive behaviours of FISC columns and the dual confinement on core concrete from the FRP tube and steel tube has not been expounded clearly. In this paper, twelve FISC specimens were tested under axial compression. The ratio of FRP and steel confining indexes and the concrete strength were the main parameters and the loading conditions (core CFST loading and whole section loading) were included. Failure patterns, load-axial shortening curves, and the strain development were analysed. In addition, the confining stresses of the FRP tube and steel tube were obtained, and it was found that the confinement on concrete could be divided into three stages of the non-confinement stage, the steel-controlling stage, and the FRP-controlling stage. In the FRP-controlling stage, the FRP confining pres-sure increased at a constant growth rate while the steel confinement was gradually weakened owning to the restraints of the interlayer grouting material. Furthermore, by regarding the concrete and grouting material as a whole unity, the axial stress-strain model of the confined concrete-grouting was developed, and the proposed model can predict the compressive stress-strain behaviours of an FISC column with good accuracy and simplicity.