Evaluation of an Energy Separation Device for the Efficiency Improvement of a Planar Solid Oxide Fuel Cell System with an External Reformer

Due to the high operating temperature of solid oxide fuel cells (SOFC), the system efficiency depends on efficient thermal integration and the effective construction of system configuration. In this study, nine configurations of system integration design were investigated to evaluate the possible improvement of system efficiency with energy separation devices. The models were developed under the Matlab/Simulink (R) platform with Thermolib (R) module. The reference layout of the simulation included an SOFC stack, a compressor, an external reformer with a burner, a three-way valve, a heat exchanger, and a water pump. From the reference case, eight cases extended layouts for the capability of thermal energy utilization with a catalytic converter, SOFC hybridization, and an energy separation device. Since the energy separation device was beneficial to thermal energy utilization via a boost to the gas temperature, electric efficiency, and combined heat and power (CHP) efficiency was improved with the thermal integration of the energy separation device with a turbo generator.