Compressive strength prediction of composite lattice structure using compression test results of subelement specimens

A cylindrical structure used in a space launch vehicle should endure the compressive load and it must satisfy the requirement of compressive strength. For the light-weight of the structure and improving the performance of launch vehicle, a cylindrical structure reinforced by composite lattice can be used. Therefore, a compressive strength prediction technique of the cylindrical composite lattice structure is required. In this paper, the failure criterion was proposed using the compression test of a composite lattice subelement and a simple finite element analysis for the subelement. The failure criterion was introduced using the effect of the out-of-plane and in-plane bending deformation of the rib constituting the grid of structure on the compressive strength. The subelement specimen was prepared from two different structures and the compression test was performed using several fixture jigs which can generate various deformation of the specimen. The test results and finite element model were used to examine the effect of out-of-plane and in-plane bending deformation of the rib on the compressive strength and the failure criterion which can predict the compressive strength was derived using the relationships between each parameter. The compressive failure load of the cylindrical composite lattice structure was predicted by using the proposed method and the validity and accuracy of this method were verified through a comparison of the predicted results with the test results. It was possible to predict the compressive strength within a 5% error of the experimental result.