Air/water interfacial waves with a droplet at the tip of their crest

In nature, it is common to observe water wave crests with a droplet at their tip. This fascinating configuration remains unexplained from the physical point of view. The present study explores such a unique local configuration numerically. Solitary waves that propagate at the interface between two layers of irrotational fluids are considered. Extending the work of Guan et al. ["A local model for the limiting configuration of interfacial solitary waves, "J. Fluid Mech. 921, A9 (2021)], the density ratio has been decreased to a very small value equal to 0.001, which is close to the air/water density ratio at sea level (0.0013). A highly accurate solution for the limiting configuration of solitary waves is obtained by solving the irrotational Euler equations using the boundary integral method and Newton's iterations. It is confirmed that the limiting configuration consisting of a droplet sitting on a crest with a 120 degrees angle exists for very small density ratios. This limiting configuration obviously does not exist for surface waves with a void on the top, thus stressing the crucial role played by the air. The droplet is stationary in a frame of reference moving with the wave and experiences intense shear at its tip. From the energy point of view, the formation of a crest with a droplet is accompanied by a remarkable drop of kinetic and potential energies of water in the vicinity of the crest. Furthermore, we present a simple set of scaling relations for the fall of the droplet. (c) 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http:// creativecommons.org/licenses/by/4.0/).