Modified heat treatment and related microstructure-mechanical property evolution of arc melting additively manufactured GH4169 Ni- based superalloy

GH4169 Ni-based superalloy was prepared by wire arc additive manufacturing (WAAM) in this study. Similar to the microstructure of other additive manufactured superalloys, the additively manufactured GH4169 alloy suffered from a high-volume fraction of Laves phase, which is detrimental to the alloy's mechanical properties. To solve this problem, two different post heat-treatment approaches were selected to improve the tensile properties at both room and elevated temperatures, which are the one with solution treatment temperature at 950 degrees C and the modified one with solution treatment at 1150 degrees C, respectively. Detailed phase analysis during different heat treatment processes was conducted using both scanning and transmission electron microscopes. Comparative tensile tests were also conducted at both room tem-perature and 650 degrees C to analyze the role of the different microstructures on the deformation responses of the prepared samples. By increasing the solution treatment temperature from 950 degrees to 1150 degrees C, the volume fraction of Nb-rich Laves phase dramatically decreased, and the previously Laves-phase-trapped Nb con-tributed to the formation of the strengthening gamma '' phase. As a result, the tensile strength of this modified treated alloy is significantly improved at both room and elevated temperatures. Additionally, due to lower volume fraction of the Laves phase, the elongation of the modified treated alloy at room temperature is improved by similar to 35%. These findings provided new insights into the post-heat treatment approaches of the WAAM Ni-based superalloy.(c) 2023 Published by Elsevier B.V.