A machine-learning-based event-triggered model predictive control for building energy management

Model predictive control (MPC) for building energy management has exhibited a huge potential for largely cutting down energy use and improving human comfort. However, the high demand for computational power for solving the optimization is challenging the widespread deployment of MPC in real buildings. Typical MPC em-ploys a time-triggered mechanism (TTM) that runs optimization recurrently at each time step without consid-ering the necessity, which could cause excessive computation resource usage. This paper proposes an event -triggered mechanism (ETM) that only runs optimization when triggering events occur. Contrary to conven-tional ETMs that only considers the current information (e.g., room conditions), the ETM proposed is based on a cost function that covers the past, current, and future information. Based on the proposed ETM, a machine -learning-based event-triggered model predictive control (ETMPC) system that optimizes both building energy efficiency and thermal comfort is developed. The developed ETMPC system is then employed for air-conditioning control for performance evaluation through simulations. The control performance of the proposed ETMPC is compared to an MPC employing TTM and a common thermostat. Compared to the MPC employing TTM, the proposed ETMPC reduced the computational load in terms of the number of optimization runs by 77.6%-88.2%, meanwhile, achieving similar energy savings (more than 9.3% energy saving over the thermostat) as the MPC employing TTM does (9% energy saving over the thermostat). With the significant reduction of computational load, the ETMPC achieves similar thermal comfort performance as the MPC employing TTM does, and it is significantly better over the thermostat.