Highly Transparent and Mechanically Robust Energy-harvestable Piezocomposite with Embedded 1D P(VDF-TrFE) Nanofibers and Single-walled Carbon Nanotubes

Herein, highly transparent, flexible, and ultrathin piezocomposite, in which electrospun poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)] nanofibers (NFs) and aerosol-synthesized single-walled carbon nanotubes (SWCNTs) are embedded in elastomer matrix, is fabricated. The P(VDF-TrFE) NF mat is exploited as a piezoelectric layer of the piezocomposite while the SWCNT film is applied as a transparent conductive electrode thereof. The use of these 1D nanomaterials allows the piezocomposite not only to be high transparency along with low diffusion of light (i.e., haze factor) but also to exhibit enhanced mechanical properties. In addition, the coupling effect of piezo- and flexoelectricity exhibited from the electrospun NFs and the acid-doping effect conducted on the SWCNTs facilitates a significant improvement in kinetic energy-harvesting performance, leading to a maximum output voltage of 26.8 V. Moreover, electrospinning and aerosol chemical vapor deposition methods employed here are facile, scalable, and cost-effective, thus are expected to accelerate the development of industrially feasible next-generation wearable electronics.