Relieving Residual Stress of 316L Stainless Steel by Acoustic/Thermal Composite Treatment

The influence of temperature, vibration time, amplitude, and other factors on the residual stress release effect was studied using the method of low-temperature heating and high-frequency ultrasonic vibration, and excellent control parameters were obtained. In addition, the influence of cutting weld reinforcement on the residual stress release was also studied. The results demonstrate that the highest relative residual stress release rate was 280.29%, the average release was over 150 MPa, and the efficiency was higher than that of the general stress release methods. After cutting the reinforcement, only a small part of residual stress was released, influencing the overall residual stress distribution relatively little. The experimental material was a butt-welded 316L stainless steel plate mu-X360s diffractometer, and this was used for measuring the residual stress.