Hydrogeochemical evolution and assessment of groundwater quality for drinking and irrigation purposes in the Gushegu Municipality and some parts of East Mamprusi District, Ghana

The Gushegu Municipality and the East Mamprusi District in Ghana are dominated by the Oti/Pendjari Group within the Voltaian Supergroup. The major rock types found in the area are quartzites, siltstones, conglomerates, and shales with minor occurrences of tillites, silexites, limestones, and barite-rich dolomites. The inhabitants of the area are mainly peasant farmers, and their activities might be influencing the groundwater chemistry, but little is known about the quality of the groundwater. Therefore, this study evaluated the suitability of groundwater resources in the Gushegu Municipality, and some parts of the East Mamprusi District in Ghana for domestic and irrigation uses, employing hydrogeochemical graphing, geochemical modelling, multivariate statistical analysis, and computation of water quality indices. Sodium (Na + ), with concentrations ranging from 4.93 to 323 mg/L and a mean of 169 mg/L, is found to be the major cation in the groundwater, while bicarbonate (HCO 3 − ), with concentrations ranging from 19.9 to 685 mg/L and a mean of 397 mg/L, is the major anion in the area. The dominant hydrochemical facies is the Na–HCO3 type, accounting for about 72.7% of the study area’s groundwater and is influenced by silicate weathering, carbonate mineral dissolution, and ion exchange reactions. Other factors accounting for this dominance may be anthropogenic activities, including the dissolution and leaching of fertilizers from farmlands. Overall, this study reveals that the groundwater in the area is suitable for drinking based on the WQI classification. There are localized contaminations with respect to B and F − , making the water in those areas unsuitable for drinking. Also, the groundwater in the area is unsuitable for irrigation purposes due to the high Na% values (43 to 99% with a mean of 86%), magnesium hazard values (1 to 312 with a mean of 88), and sodium adsorption ratio (0.57 to 42.4 with a mean of 12.7). All these indices exceed their respective standards for irrigation purposes.