Analysis of Contact Surface Wear Performance of O-Ring Dynamic Seal Based on Archard Model

With the development of hydraulic system to high pressure gradually, the leakage risk of sealing system increases, and it is necessary to confirm the performance parameters of sealing structure through analysis and calculation. The traditional analysis of the friction and wear performance of the seal ring is limited to the amount of wear, and cannot describe the surface wear characteristics of the O-ring in detail. Based on the Archard model, this paper constructs a model to analyse and calculate the friction and wear performance of the dynamic seal structure through the material characteristics and operating parameters, analyses the friction and wear characteristics of the O-ring seal structure under different compression ratio, medium pressure, relative slip velocity and temperature, and summarizes the influence of each single variable on the wear characteristics of the dynamic seal structure. According to the analysis in this paper, the increase of medium pressure of 5 MPa will cause the wear concentration area of the contact surface to move to the back pressure side, and the overall wear will be reduced, but the increase of contact area will lead to the weakening of sealing effect. By the action of 15 MPa, when the compression ratio is between 5% and 10%, the change of cumulative wear rate and the wear rate of each node is small.