Porous Co-Pt Nanoalloys for Production of Carbon Nanofibers and Composites.

The controllable synthesis of carbon nanofibers (CNF) and composites based on CNF (Metals/CNF) is of particular interest. In the present work, the samples of CNF were produced via ethylene decomposition over Co-Pt (0-100 at.% Pt) microdispersed alloys prepared by a reductive thermolysis of multicomponent precursors. XRD analysis showed that the crystal structure of alloys in the composition range of 5-35 at.% Pt corresponds to a lattice based on cobalt (3), while the CoPt (50 at.% Pt) and CoPt (75 at.% Pt) samples are intermetallics with the structure 4/ and -3, respectively. The microstructure of the alloys is represented by agglomerates of polycrystalline particles (50-150 nm) interconnected by the filaments. The impact of Pt content in the CoPt samples on their activity in CNF production was revealed. The interaction of alloys with ethylene is accompanied by the generation of active particles on which the growth of nanofibers occurs. Plane Co showed low productivity (~5.5 g/g), while Pt itself exhibited no activity at all. The addition of 15-25 at.% Pt to cobalt catalyst leads to an increase in activity by 3-5 times. The maximum yield of CNF reached 40 g/g for CoPt sample. The local composition of the active alloyed particles and the structural features of CNF were explored.