Efficient photocatalytic degradation of Rhodamine B dye using solar light-driven La-Mn co-doped Fe2O3 nanoparticles.

This work aims to develop a highly efficient solar light-induced photocatalyst based on La-Mn co-doped Fe2O3 nanoparticles. Pure Fe2O3 and La-Mn co-doped Fe2O3 nanoparticles were fabricated by a simple co-precipitation method. The photocatalysts were analyzed for their morphological, structural, and magnetic characteristics. Scanning electron microscopy analysis demonstrated the formation of semi-spherical nanoparticles along with small aggregations. The size of nanoparticles was measured using a transmission electron microscope and found in the range of 42-49 nm. The crystalline nature and geometry of synthesized nanoparticles were investigated using X-ray diffraction analysis. Due to the incorporation of La-Mn, the saturation magnetization and remanent magnetization of the nanoparticles decreased from 6.17 to 2.89 emu/g and 1.15 to 0.52 emu/g, respectively, while the coercivity was reduced from 756.72 to 756.67 Oe. The surface area of nanoparticles was increased from 77.93 to 87.45 m2/g as a result of La-Mn co-doping. The photocatalytic performance of the Fe2O3, La0.1Mn0.3Fe1.6O3, and La0.2Mn0.2Fe1.6O3 catalysts was assessed by their capability to degrade Rhodamine B (RhB) under solar light illumination. La0.2Mn0.2Fe1.6O3 displayed exceptional degradation performance, degrading RhB to 91.78% in 240 min, in comparison to La0.1Mn0.3Fe1.6O3 (71.09%) and pristine Fe2O3 (58.21%) under specified reaction conditions ((RhB) = 50 ppm; (catalyst) = 40 mg/L; pH = 7; T = 25 °C)). RhB degradation was affected by changing pH, catalytic dosage, dye concentration, and temperature. The degradation of RhB was found to be pseudo-1st order kinetics. The exceptional photocatalytic performance of La0.2Mn0.2Fe1.6O3 catalysts showed that the synthesized nanoparticles could be effectively utilized to remove organic pollutants from industrial wastewater.