Effect of Different Iron Phases of Fe/SiO2 Catalyst in CO2 Hydrogenation under Mild Conditions

The effect of different active phases of Fe/SiO2 catalyst on the physio-chemical properties and the catalytic performance in CO2 hydrogenation under mild conditions (at 220 degrees C under an ambient pressure) was comprehensively studied in this work. The Fe/SiO2 catalyst was prepared by an incipient wetness impregnation method. Hematite (Fe2O3) in the calcined Fe/SiO2 catalyst was activated by hydrogen, carbon monoxide, and hydrogen followed by carbon monoxide, to form a metallic iron (Fe/SiO2-h), an iron carbide (Fe/SiO2-c), and a combination of a metallic iron and an iron carbide (Fe/SiO2-hc), respectively. All activated catalysts were characterized by XRD, Raman spectroscopy, N-2 adsorption-desorption, H-2-TPR, CO-TPR, H-2-TPD, CO2-TPD, CO-TPD, NH3-TPD, and tested in a CO2 hydrogenation reaction. The different phases of the Fe/SiO2 catalyst are formed by different activation procedures and different reducing agents (H-2 and CO). Among three different activated catalysts, the Fe/SiO2-c provides the highest CO2 hydrogenation performance in terms of maximum CO2 conversion, as well as the greatest selectivity toward long-chain hydrocarbon products, with the highest chain growth probability of 0.7. This is owing to a better CO2 and CO adsorption ability and a greater acidity on the carbide form of the Fe/SiO2-c surface, which are essential properties of catalysts for polymerization in FTs.