Thermal Stability of the Copper and the AZO Layer on Textured Silicon

Transparent conductive oxide (TCO) film is the most widely used front electrode in silicon heterojunction (SHJ) solar cells. A copper metallization scheme can be applied to the SHJ process. The abundance of zinc in the earth's crust makes aluminum-doped zinc oxide (AZO) an attractive low-cost substitute for indium-based TCOs. No work has focused on the properties of the copper and AZO layers on the textured silicon for solar cells. This work deposited an aluminum-doped zinc oxide layer and copper metal layer on textured (001) silicon by a sputtering to form Cu/AZO/Si stacks. The structures of Cu/AZO/Si are characterized by scanning electron microscope (SEM), scanning transmission electron microscope (STEM), and energy-dispersive X-ray spectrometer (EDS). The results show that the copper thin film detached from AZO in the valley of the textured silicon substrate at a temperature of 400 degrees C. Additionally, the gap between the copper and AZO layers increases as temperature increases, and the 65 nm thickness AZO layer was found to be preserved up to 800 degrees C.