Electrochemical Potentiostatic Activation for the Improvement of 270nm AlGaN-Based UV-C Light-Emitting Diodes

Abstract The electrochemical potentiostatic activation (EPA) method was performed by removing hydrogen atoms from the inside of the Mg-doped p-GaN/p-AlGaN multilayer of 270nm AlGaN-based UV-C light-emitting diodes (UV-C LEDs). The EPA evaluation was controlled among the applied voltages of 2, 3, and 4 V for 10 minutes under 1.0M HCl solution, and the hole concentration inside the p-GaN/p-AlGaN multilayer was decreased. To evaluate the characteristics and reliability of UV-C LEDs, the basic flip chip process was applied and then mounted on the AlN ceramic package by AuSn eutectic bonding. Compared to the as-fabricated LED, we demonstrated an increase of over 8% in light output power at 350mA in UV-C LEDs by improving internal quantum efficiency (IQE) with EPA treatmentat 3 V. The enhanced IQE and higher EQE contributed to improving the reliability of the LEDs, thus resulting in a ~7% lifetime extension.