Design, fabrication, and characterization of Ti/Au transition-edge sensor with different dimensions of suspended beams

For photon detection, superconducting transition-edge sensor (TES) micro-calorimeters are excellent energy-resolving devices. In this study, we report our recent work in developing Ti-/Au-based TES. The Ti/Au TES devices were designed and implemented with a thickness ratio of 1:1 and different suspended structures using micromachining technology. The characteristics were evaluated and analyzed, including surface morphology, 3D deformation of suspended Ti/Au TES device structure, I-V characteristics, and low-temperature superconductivity. The results showed that the surface of Ti/Au has good homogeneity and the surface roughness of Ti/Au is significantly increased compared with the substrate. The structure of Ti/Au bilayer film significantly affects the deformation of suspended devices, but the deformation does not affect the I-V characteristics of the devices. For devices with the Ti/Au bilayer (150 - m x 150 mu m) and beams (100 mu m x 25 mu m), the transition temperature (T (c)) is 253 mK with a width of 6 mK, and the value of the temperature sensitivity alpha is 95.1.