Preparation and characterization of Nextel 720/alumina ceramic matrix composites via an improved prepreg process

In this work, the Nextel 720 continuous fiber reinforced alumina ceramic matrix composites (CMCs) were prepared by an improved prepreg process. The alumina matrix was derived from aqueous slurry, which consisted of organic glue, alumina sol, nanometer alumina powders, and micrometer alumina powders. This design provided a densely packed matrix for the CMC, and made the whole process relatively simple. The ratio of different alumina components in aqueous slurry was optimized to obtain good sintering activity, high thermal resistance, and excellent mechanical properties simultaneously. Furthermore, a preceramic polymer of mullite was used to strengthen the ceramic matrix through a multiple infiltration process. The final CMC sample achieved a high flexural strength of 255 MPa and a good high-temperature stability. After 24 h of heat treatment at 1100 degrees C, 85% of the maximum flexural strength still had been retained.