Tempered Bainite And Martensite Embrittlement In Microalloyed Steel For Forged Railroad Wheel To Heavy Haul Application

This research shows two new microalloyed steels with niobium (Nb) for railroad wheels (Nb1 and Nb2) applied on heavy haul transportation (load over 30 tons/axle). The steels have mixed microstructure composed of pearlite and bainite (finished wheel rim section), and another one composed of martensite with bainite (black wheel section removed on machining) obtained by continuous cooling quenching heat treatment followed by tempering. The bainitic and martensitic microstructure are sensitive to the temper embrittlement phenomenon; therefore, knowing the embrittlement temperature range of these steels is mandatory in order to avoid such an event in the tempering process. Charpy specimens were extracted from the rim of railroad wheels, austenitized (860 degrees C), quenched in water for four minutes, and tempered at different temperatures to obtain the embrittlement curve. Three materials were compared: AAR (Association of American Railroads) Class C steel with pearlitic microstructure (not sensitive to embrittlement), Nb1, and Nb2 microalloyed steels with martensitic, bainitic, and pearlitic microstructures. The microalloyed steels have niobium (Nb), molybdenum (Mo), and silicon (Si) addition. The effect of Si content and the microstructure (analyzed by Scanning Electronic Microscope (SEM)), regarding the embrittlement phenomenon, was also studied. The microstructure of Nb2 steel was analyzed by with Transmission Electronic Microscope (TEM) for improving its characterization.