Bio-Waste Influence On Air Lime Mortar Performance Corrosion - Optimization Using The Surface Response Method

PurposeThe purpose of this paper is to characterize the properties lightweight green air lime and marble waste mixtures, relating microstructural and chemical properties with physical development of the material, an effort has been made to simulate the structure of the different mortar reinforced by two main layers plants.Design/methodology/approachThis paper presents an experimental design of response surface methodology, a model which predicts the mechanical strength and evaluate the effectiveness of bio-waste as a corrosion inhibitor to resist the steel corrosion in air lime mortars as a function of the proportion of the constituents of a new air lime mortar based on a combination of different percentages of marble waste (MRW), air lime and deferent type, layers of natural fiber reinforcement. Luffa sponge gourd and oakum hemp fiber residues capabilities in civil engineering are evaluated by combining numerical and experimental approaches for repair mortar based on air lime and marble waste. Several electrochemical techniques, mechanical strength tests and visual inspection of steel surface were performed.FindingsThe results revealed good mechanical strength and corrosion protection properties of air lime mortar containing the fiber naturel. These green wastes are considered economically feasible, as well having possessing good performance efficiency in protecting rebar reinforcement. These results were confirmed via polarization curves and electrochemical impedance spectroscopy measurements.Originality/valueThe prepared green air lime mortar provided good corrosion protection to the rebar. The significance of this study is to encourage the usage of solid white marble waste to prepare biomass-based repair mortar with good mechanical and anti-corrosion properties on the long term is still a big challenge.