A New Fully-Detailed Finite Element Model Of Spiral Strand Wire Ropes For Fatigue Life Estimate Of A Mooring Line

Spiral strand wire ropes are commonly used in the mooring system of offshore structures. When dealing with the fatigue limit state, engineers have to consider many different load cases, according to the variability of the environmental state. This usually prevents the use of any detailed numerical model of the mooring lines. In this paper, we propose a new method to evaluate with an affordable computational cost the detailed mechanical stress state in different parts of the wire ropes used for mooring a floating offshore wind turbine. We first compute tension and bending history in the mooring, with the hydrodynamic software Deeplines (TM), assuming for simplification stationary aerodynamic loads on the floater. These time series are then accounted for in a novel Finite Element Model of the spiral strand, with small sliding among the wires. The obtained kinematics and stress state of the wires can then feed a fatigue law based on fretting fatigue, which has been experimentally evidenced to condition the fatigue life of spiral strand wire ropes. The potential of this method is illustrated with an application to a cylinder-like shape floater equipped with 3 pairs of catenary mooring lines. It is shown that bending and tension histories do not significantly depend on the wire rope bending stiffness.