Fabrication, Characterization, and Modeling of an Aluminum Oxide-Gate Ion-Sensitive Field-Effect Transistor-Based pH Sensor

The ion-sensitive field-effect transistor (ISFET) is a popular technology utilized for pH sensing applications. In this work, we have presented the fabrication, characterization, and electrochemical modeling of an aluminum oxide (Al 2 O 3 )-gate ISFET-based pH sensor. The sensor is fabricated using well-established metal–oxide–semiconductor (MOS) unit processes with five steps of photolithography, and the sensing film is patterned using the lift-off process. The Al 2 O 3 sensing film is deposited over the gate area using pulsed-DC magnetron-assisted reactive sputtering technique in order to improve the sensor performance. The material characterization of sensing film has been done using x-ray diffraction, field-emission scanning electron microscopy, energy-dispersive spectroscopy, and x-ray photoelectron spectroscopy techniques. The sensor has been packaged using thick-film technology and encapsulated by a dam-and-fill approach. The packaged device has been tested in various pH buffer solutions, and a sensitivity of nearly 42.1 mV/pH has been achieved. A simulation program with integrated circuit emphasis (SPICE) macromodel of the Al 2 O 3 -gate ISFET is empirically derived from the experimental results, and the extracted electrochemical parameters have been reported. The drift and hysteresis characteristics of the Al 2 O 3 -gate ISFET were also studied, and the obtained drift rates for different pH buffer solutions of 4, 7, and 10 are 0.136 μ A/min, 0.124 μ A/min, and 0.108 μ A/min, respectively. A hysteresis of nearly 5.806 μ A has been obtained. The developed sensor has high sensitivity along with low drift and hysteresis.