Automated Solid-Phase Microextraction And Negative Chemical Ionization Gc-Ms For The Measurement Of Synthetic Pyrethroids

Synthetic pyrethroids are frequently detected as trace contaminants in sediment and natural waters. Because of the importance of measuring both total and freely available concentrations for ecotoxicity evaluations, solid-phase microextraction (SPME) combined with gas chromatography-mass spectrometry using negative chemical ionization (NCI-GC-MS) was investigated as an analytical technique. Automated SPMENCI-GC-MS quantification of freely dissolved (and thus potentially bioavailable) pyrethroids in aqueous samples containing dissolved organic matter (DOM) was successfully applied. The introduction of stable isotope-labeled pyrethroid calibration standards into the water sample allows for the simultaneous determination of total concentrations. Because pyrethroids adsorb rapidly to container walls (especially in calibration standard solutions without DOM) it was necessary to develop a technique to minimize the resulting time-dependent losses from calibration standard solutions in autosampler vials as they await analysis. A staggered preparation of these analytical calibration standards immediately prior to analysis was shown to ameliorate this problem. The developed method provides accurate and reproducible results for aqueous samples containing a range of dissolved organic matter concentrations (e.g., sediment pore water or sediment/water mixtures) and yields practical benefits in comparison to conventional analysis methods, such as reduced sample volume requirements, reduced solvent consumption, and fewer sample manipulations, and makes simultaneous measurements of freely dissolved/bioavailable pyrethroids and total pyrethroids possible.