Lithography-free and Highly Angle Sensitive Structural Coloration Using Fabry–Perot Resonance of Tin

Recently, there has been much interest in applying the color changes of nano-patterned structures to sensor technology. However, the lithographic nano-patterning process is not environmentally friendly, and it is difficult to fabricate large areas of color due to limitations associated with this approach. In this study, we realized a highly tunable structural coloration based on a Fabry–Perot interferometer design that does not require nano-patterning processes. To increase the reflected color change according to the angle, a color element using an asymmetric metal–insulator–metal structure was applied, fabricated using silver–silicon dioxide–tin (Sn), respectively. Using the optical properties of Sn, we maximized the change in reflection color and realized three primary colors of subtractive color of cyan, magenta and yellow according to the angle of designed MIM structure. Theoretical and experimental results revealed that the color and intensity of the reflectance depended strongly on the angle of the reflective surfaces. The manufacturing process is simple and yields large surfaces of high quality. Based on this premise, we fabricated a soft robot capable of color camouflage, and an angle-detecting color sensor for inspecting the three-dimensional shape quality of curved glass with a high sensitivity of 1.8 nm/degree. In addition, we propose a shape evaluation method by color, spectrometry, and monochromatic light.