The Correlated Effects Of Polyetheramine-Functionalized Graphene Oxide Loading On The Curing Reaction And The Mechanical Properties Of Epoxy Composites

In this study, the effects of polyetheramine (D230) functionalized graphene oxide loading on the curing reaction, thermal and mechanical properties of epoxy composites were studied and the correlation between structure and property of epoxy composite was established. In the functionalization of graphene oxide (GO), the effect of the mass ratio of D230 to GO on chemical properties of the functionalized GO was investigated. Results showed that D230 were successfully covalently grafted onto surface of two-dimensional functionalized GO sheet. The functionalized GO sheets prepared under optimal condition of D230/GO ratio of 1:1 dispersed evenly in epoxy composites, indicating the possibility of the epoxy composite fabrication by the solvent-free technique. The analysis of qualitative Cure Index suggested that epoxy composites were subjected to excellent curing. The quantitative evaluation of curing kinetics demonstrated that the functionalized GO exhibited a chemical facilitation on the curing reaction. However, the functionalized GO simultaneously physically restricted the curing reactivity, especially at high loading. These contributed to the improved interfacial properties and high toughness of the epoxy composites. Compared to neat epoxy, the epoxy composites showed effective tensile strength improvement of similar to 10.0% (77.0 MPa), tensile modulus enhancement of similar to 7.7% (3.34 GPa), flexural modulus increment of similar to 12.1% (3.43 GPa), and flexural strength increment of similar to 10.6% (124.3 MPa). This study demonstrated an effective and environment-friendly strategy to design GO reinforced epoxy composites with favorable dispersion and interfacial bonding, and it further clarified the relationship between the crosslinking network/interfacial structure and the mechanical properties of epoxy composites.