A Comparative Investigation Of Long-Term Oxidation Behavior Of Selective Laser Melting-Fabricated Inconel 718 At 650 Degrees C

The oxidation behavior of the selective laser melting (SLM)-fabricated Inconel 718 was investigated through isothermal oxidation testing at 650 degrees C for 500 h and compared with that of the as-cast and as-forged specimens at the same testing conditions. The effect of microstructure and surface roughness on the oxidation behavior of the SLM-fabricated, as-cast, and as-forged Inconel 718 specimens was examined. The result shows that Inconel 718 fabricated by SLM with the unique layer structure exhibited a better resistance to the 500 h oxidation at 650 degrees C compared with as-cast and as-forged 718 with coarse dendritic structure and uniform equiaxed grain microstructure, respectively. The influence of the surface roughness on the long-time oxidation resistance of SLM specimens is not pronounced compared with that of as-cast and as-forged specimens. The tiny dendrites instead of grain boundaries are a major influencing factor for the oxidation process of SLM specimens. The surface roughness has more evident influence on the oxidation resistance of as-forged specimens than that of the as-cast ones subjected to the 500 h oxidation at 650 degrees C.